It’s been a long time since my last post and I did actually finish this project many months ago back in October 2018 however I’ve been busy with stuff so am updating today. Everything turned out fine and the PC has been working without issues, I refilled the coolant as it was a little murky…
After spending some time with the water cooling pipework I swapped over my 3.5″ WD Blue drives to the 2.5″ Seagate Barracudas and gave them a go. Whilst everything appeared to be fine in Windows the drives kept spinning down during no activity. I set the power saving state of the drives manually using Xubuntu…
My ADATA XPG Z1 2x16GB DDR4 3000MHz memory kit was originally purchased for a project to convert a PC into a small mini-ITX gaming machine. This didn’t work out (see previous posts) and the ADATA heat spreaders on the XPG Z1 were removed so it would fit under the low profile heatsink used in that…
Continuing from last time I contacted Aquatuning for assistance on the 90 degree conntector defects. As part of my email I uploaded the picture showing the issue and stated it was with all 6 connectors, can you please check your stock as I would like some without the defect. The customer service rep acknowledged the…